Mazda MX-5 Miata Sport 2007 Manual page 1756

Fig. 17: Separating Tie-Rod End From Steering Knuckle Using SSTs
Courtesy of MAZDA MOTORS CORP.
STEERING GEAR AND LINKAGE REMOVAL NOTE
1. Remove the steering gear and linkage by pulling it from the right side.
STEERING GEAR AND LINKAGE INSTALLATION NOTE
1. Tighten bolts loosely.
2. Assemble the mounting bracket with the mark on the bracket facing the vehicle rear.
2007 Mazda MX-5 Miata Sport
2007 STEERING Power Steering - MX-5 Miata