Mazda MX-5 Miata Sport 2007 Manual page 2104

2007 ACCESSORIES & BODY, CAB Glass/Windows/Mirrors - MX-5 Miata
NOTE:
5. Remove the windshield molding by pulling it outward.
Fig. 26: Identifying Protective Tape
Courtesy of MAZDA MOTORS CORP.
NOTE:
If the windshield molding is difficult to remove, warm the windshield

molding using a hot air blower.
The windshield molding is a replacement part.

NOT REUSING WINDSHIELD
NOTE:
For the areas of the sealant that are difficult to cut, use the SST (piano

wire) and follow the procedure under "Reusing Windshield".
WARNING:
1. Cut out the sealant all around the glass using a sealant remover.
2. Remove the windshield.
2007 Mazda MX-5 Miata Sport
Overlap and adhere the protective tape to the corners to prevent

damage.
Using the SST (piano wire) with bare hands can cause injury. Always

wear gloves when using the SST (piano wire).