Mazda MX-5 Miata Sport 2007 Manual page 2083

2007 ENGINE PERFORMANCE Symptom Troubleshooting - MX-5 Miata
Fig. 17: Identifying EVAP Leak Tester Control Panel
Courtesy of MAZDA MOTORS CORP.
2. Connect the SST to the vehicle.
1. Verify that the control valve on the panel is in the HOLD position then open the nitrogen bottle
valve.
2. Remove the fuel-filler cap from the vehicle.
If the fuel-filler cap is not a MAZDA part or equivalent, replace it.

3. Connect the receiver assembly (SST: AKS441130) to the vehicle cap test hose assembly (part of
the SST ) and the fuel-filler cap from the vehicle.
4. Connect the cap adaptor (SST: AKS441131) to the vehicle cap test hose assembly (part of the
SST ) and to the fuel-filler neck.
2007 Mazda MX-5 Miata Sport