Mazda MX-5 Miata Sport 2007 Manual page 1556

Fig. 16: Removing Knee Bolster
Courtesy of MAZDA MOTORS CORP.
SIDE WALL REMOVAL/INSTALLATION
CAUTION:
NOTE:
The removal procedure is the same for the driver's side.

1. Insert a tape-wrapped flathead screwdriver between the side wall and console panel, and detach clips A
and B, pins C, and tab D while pulling the side wall in the direction shown by the arrow.
2. Remove the side wall.
3. Install in the reverse order of removal.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Interior Trim - MX-5 Miata
Do not pull the side wall ends outward to remove the side wall. The

side wall and clips could be damaged.