Mazda MX-5 Miata Sport 2007 Manual page 2098

2007 ACCESSORIES & BODY, CAB Glass/Windows/Mirrors - MX-5 Miata
output motor
Power
Close
G window
output
motor
Power P/WIND
I
supply 20A fuse
J GND Body ground
PASSENGER'S SIDE
1. Verify that the continuity between the power window main switch terminals is as indicated in the table.
Fig. 22: Power Window Main Switch Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
If not as indicated in the table, replace the power window main switch.

2. Apply battery positive voltage to terminal I, and connect the ground to terminal J, and then verify that the
light emitting diode illuminates.
If not as specified, replace the power window main switch.

2007 Mazda MX-5 Miata Sport
While door glass
1.0 or less
is closing
While door glass
1.0 or less
is opening
While door glass
is closing
Ignition switch at
ON
Under any
condition: Inspect Continuity
for continuity to
ground
MOTOR INSPECTION..)
Related wiring harnesses

Power window motor (See

POWER WINDOW
MOTOR INSPECTION..)
B+
Related wiring harnesses

P/WIND 20A fuse

B+
Related wiring harnesses

GND

detected