S Function; Data Lists; Machine Data; Interface Signals - Siemens SINUMERIK 802D sl Function Manual

Auxiliary Function Outputs to PLC (H2)

9.7 Data lists

9.6.5

S function

The S function is used to determine the speed for the spindle with M3 or M4. For turning
machines with G96 (constant cutting speed) the cutting value is specified.
Reference:
/BPD/ Operation and Programming
9.7 Data lists
9.7.1

Machine data

Number
General
11100
Channel-specific
22000
22010
22020
22030
9.7.2

Interface signals

Number
Channel-specific
V2500 0000
V2500 0006
V2500 0008
V2500 0010
V2500 0012
VD2500 2000
VD2500 3000
VB2500 3004
VD2500 3008
VB2500 3012
VD2500 3016
VB2500 3020
164
Identifier
AUXFU_MAXNUM_GROUP_ASSIGN
AUXFU_ASSIGN_GROUP[n]
AUXFU_ASSIGN_TYPE[n]
AUXFU_ASSIGN_EXTENSION[n]
AUXFU_ASSIGN_VALUE[n]
Bit Name
.0 to .4 M function 1 change to M function 5 change
.0 S function 1 change
.0 T function 1 change
.0 D function 1 change
.0 to .2 H function 1 change to H function 3 change
T function 1 (DINT)
M function 1 (DINT)
Extended address of M function 1 (BYTE)
M function 2 (DINT)
Extended address of M function 2 (BYTE)
M function 3 (DINT)
Extended address of M function 3 (BYTE)
Name
Number of auxiliary functions distributed
among the AUXFU groups
Auxiliary function group
Auxiliary function type
Auxiliary function extension
Auxiliary function value
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0