Data Lists; Machine Data; Interface Signals - Siemens SINUMERIK 802D sl Function Manual

Kinematic Transformation (M1)

12.5 Data lists

12.5 Data lists
12.5.1

Machine data

Number Identifier
Channel-specific
20110 RESET_MODE_MASK
20140 TRAFO_RESET_VALUE
22534 TRAFO_CHANGE_M_CODE
24100 TRAFO_TYP_1
24110 TRAFO_AXES_IN_1
24120 TRAFO_GOEAX_ASSIGN_TAB_1
24200 TRAFO_TYP_2
24210 TRAFO_AXES_IN_2
24220 TRAFO_GOEAX_ASSIGN_TAB_2
24800 TRACYL_ROT_AX_OFFSET_1
24810 TRACYL_ROT_SIGN_IS_PLUS_1
24820 TRACYL_BASE_TOOL_1
24900 TRANSMIT_ROT_AX_OFFSET_1
24910 TRANSMIT_ROT_SIGN_IS_PLUS_1
24911 TRANSMIT_POL_SIDE_FIX_1
24920 TRANSMIT_BASE_TOOL_1
12.5.2

Interface signals

Number
Channel-specific
V3800 0001
248
Name
Definition of control basic setting after run-up and RESET/part
program end (access only possible at protection level 1/1)
Initial setting: Transformation active after Reset
M code for transformation changeover
Type of 1st transformation, possibly with axis sequence
Axis assignment at input of 1st transformation
Geo-axis assignment for 1st transformation
Type of 2nd transformation, possibly with axis sequence
Axis assignment at input of 2nd transformation
Geo-axis assignment for 2nd transformation
Deviation of rotary axis from zero position in degrees (1st TRACYL)
Sign of rotary axis for TRACYL (1st TRACYL)
Distance of tool zero point from origin of geo-axes (1st TRACYL)
Deviation of rotary axis from zero position in degrees (1st
TRANSMIT)
Sign of rotary axis for TRANSMIT (1st TRANSMIT)
Limitation of working range in front of/behind pole, 1st transformation
Distance of tool zero point from origin of geo-axes (1st TRANSMIT)
Bit Name
.6 Transformation active
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0