Quick Start (Level) - Siemens SITRANS LUT400 Manual

• Quick Start (Level) (see page 9)
• Quick Start (Volume) (see page 12)
• Quick Start (Volume - Linearization) (see page 15)
• Quick Start (Flow) (see page 19)
Follow steps within the wizard to configure your device.

Quick Start (Level)

Step 1 – Identification
1. You can accept the default values without modification (TAG, Long TAG, Descriptor,
Message, and Installation Date fields can be left blank),
OR
1. Click on Read Data from Device (if this is not the first time running the Quick Start
Wizard).
2. The default Language is English. Select a different language value from the drop-
down box if you wish to change the language displayed on the device.
Italian, Portuguese and Russian are not supported in SIMATIC PDM for
Note:
SITRANS LUT400. If the device is set to one of these languages, it may be
necessary to switch the device to English, German, French, Spanish or Chinese.
3. After making all desired changes, click on Next.
Step 2 – Application
1. Select the Transducer that will operate with the LUT400.
2. Select the Application Type (Level, Space, Distance).
A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 9