Siemens SITRANS LUT400 Manual page 18

Step 4 - Ranges
1. Modify parameters as required. (Vessel Dimension A and L are required for certain
Vessel Shapes selected in previous step.)
2. Click on Next.
Step 5 – Summary
1. Check parameter settings, and click on Cancel to abort, or apply your changes.
2. Click Apply to save your changes and return to the main menu, or click Apply and
Transfer to save your changes and transfer settings to the device.
The message Quick Setup was successful will appear. Click on OK.
Configuration via SIMATIC PDM Quick Start Wizard for a simple Volume application is
now complete.
Page 14 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270