Wizard - Quick Start (Volume) - Siemens SITRANS LUT400 Manual

Wizard - Quick Start (Volume)

Step 1 – Identification
1. Navigate to Configure/Setup > Wizard > Wizard - Quick Start (Volume).
2. You can accept the default values without modification. (TAG, Long TAG, Descriptor,
Message, and Date fields can be left blank.) If desired, make changes then click on
Next.
Step 2 – Application
1. Select the Siemens transducer connected to the device.
2. Application Type defaults to Volume.
3. Select the Temperature Source, and if fixed, enter a Fixed Temperature value.
4. Click on Next.
1.
For details see parameter
Instructions (7ML19985MV01).
A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL
1
2. 1 .3.Sensor Mode
in SITRANS LUT400 (HART) Operating
Page 57