Siemens SITRANS LUT400 Manual page 55

2) In Device Connection View, right-click on the device icon and select Scan Device to
upload parameters from the device.
3) Double click the device icon to open the startup screen. The startup screen shows
device identification details, and a navigation window on the left-hand side of the
screen.
4) Configure the device using the Quick Start Wizard. See
Device Manager
Before initiating a Quick Start Wizard to configure the device, you may wish to gather the
necessary parameter values. Parameter Configuration Charts listing all parameters and
available options for each application type are available on our website. Go to:
www.siemens.com/sitransLUT400 > Support > Application Guides. You can record data
and select from options on the chart that apply to your application, then complete the
Quick Start Wizards via AMS Device Manager
A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL
on page 54.
Quick Start Wizards via AMS
on page 54.
Page 51