Siemens SITRANS LUT400 Manual page 24

Step 2 – Application
1) Select the Transducer that will operate with the LUT400.
2) Select the Temperature Source (Transducer, Fixed Temperature, External TS-3,
Average of Transducer and TS-3), and if Fixed, enter the Fixed Temperature value.
3) Click on Next.
Step 3 – Primary Device Shape
1) Select a Primary Measuring Device for your Flow application and change Units if
desired.
2. Additional parameter default values appear depending on the Primary Measuring
Device selected. Modify as required.
3. Click on Next.
Page 20 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270