Siemens SITRANS LUT400 Manual page 32

Echo Profile
When the Echo Profile Wizard is launched from PDM, the current echo profile will display.
Click on the Measure button to reload the profile. (Select Standard Resolution to update
the profile faster. Detailed Resolution uploads all data points.)
If a communication error exists, the profile will not display, and all parame-
Note:
ter values will be set to 0.
Echo profile saving
Notes:
• Double click on each axis and record the Xscale and Data Scale values, so that you
can restore the default view by resetting to these values.
• You can save a profile or delete a saved profile.
• After saving a profile click on Close, not the x button, to close the Echo Profile
Utilities window: otherwise the profile will not be saved.
• After saving a profile go to View Saved Echo Profiles tab to view it.
Echo profile data logging
You can store up to 60 profiles at a selected interval (maximum 60 minutes).
Inside Echo Profile Utilities, in the Echo Profile Time Based Storage window:
• Enter the desired interval between stored profiles.
• Enter the desired number of profiles to be stored (maximum 60).
• Click on Start. A message appears warning of the time delay and warning that all
previous saved profiles will be overwritten. Click on OK to proceed. The new profiles
will be saved with their date and time.
View Saved Echo Profiles
To view saved profiles, click on Saved Echo Profiles, and select a profile. The selected
profile with associated parameter values will display.
Page 28 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270