Siemens SITRANS LUT400 Manual page 117

2 Modifiers
3 Totalizers
8 Alarms
1 Level
A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL
1 Wall Cling Reduction
1 Enable
2 Level Setpoint Vari...
2 Energy Savings
1 Enable
2 Peak Lead Time
3 Peak 1 Start Time
4 Peak 1 End Time
5 Peak 2 Start Time
6 Peak 2 End Time
7 Peak 3 Start Time
8 Peak 3 End Time
9 Peak 4 Start Time
Peak 4 End Time
Peak 5 Start Time
Peak 5 End Time
Peak ON Pump 1
Peak OFF Pump 1
Peak ON Pump 2
Peak OFF Pump 2
3 Pump Run-On
1 Enable
2 Run-On Interval
3 Run-On Dur Pump 1
4 Run-On Dur Pump 2
4 Pump Start Delays
1 Pump Start Delay
2 Power Resumption Del...
1 Running Total High
2 Running Total Low
3 Totalizer Dec. Pos.
3 Totalizer Multiplier
4 Inflow/Disch. Adj.
1 High Level Alarm
1 Enable
2 High Level Value On
3 High Level Value Off
4 Assigned Relay
5 Alarm State
2 In-Bounds Level Alarm
1 Enable
2 High Level Value
3 Low Level Value
4 Assigned Relay
5 Alarm State
3 Low Level Alarm
1 Enable
2 Low Level Value On
3 Low Level Value Off
4 Assigned Relay
5 Alarm State
Page 113