Siemens SITRANS LUT400 Manual page 20

2. The default Language is English. Select a different language value from the drop-
down box if you wish to change the language displayed on the device.
Italian, Portuguese and Russian are not supported in SIMATIC PDM for
Note:
SITRANS LUT400. If the device is set to one of these languages, it may be
necessary to switch the device to English, German, French, Spanish or Chinese.
3. After making all desired changes, click on Next.
Step 2 – Application
1. Select the Transducer that will operate with the LUT400.
The Application Type defaults to Volume.
2. Select the Temperature Source (Transducer, Fixed Temperature, External TS-3,
Average of Transducer and TS-3), and if Fixed, enter the Fixed Temperature value.
3. Click on Next.
Page 16 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270