Wizard - Quick Start (Level) - Siemens SITRANS LUT400 Manual

Wizard - Quick Start (Level)

Step 1 – Identification
1. Navigate to Configure/Setup > Wizard > Wizard - Quick Start (Level).
2. You can accept the default values without modification. (TAG, Long TAG< Descriptor,
Message, and Date fields can be left blank.) If desired, make changes then click on
Next.
Step 2 – Application
1. Select the Siemens transducer connected to the device.
2. Select the Application Type (Level, Space, Distance
3. Select the Temperature Source, and if fixed, enter a Fixed Temperature value.
4. Click on Next.
1.
For details see parameter
Instructions (7ML19985MV01).
A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL
2. 1 .3.Sensor Mode
in SITRANS LUT400 (HART) Operating
1
).
Page 55