Accessing The Device Via The Web Browser - Siemens SITRANS LUT400 Manual

11. When prompted to start the Abyss Web Server click No, and on the next window
showing installation
12. Click Finish to exit the Setup Wizard.
Installation of the Browser is now complete.

Accessing the device via the web browser

Before accessing the device via the browser for the first time, you must know the
communication port (COMPORT) to which the device is attached. This information can be
found in the Device Manager on your computer.
Communication port setting
1. Go to Start > Settings > Control Panel and double-click System to open the
properties window. Click on Device Manager located on the Hardware tab.
2. Open Ports (COM & LPT) and note the COM number assigned to USB CDC serial
port emulation.
To access the device via the web browser, double-click the desktop shortcut
SITRANS LUT400,
or go to Start > Programs > SITRANS LUT400 HART Browser Interface (created during the
installation process). The Abyss server will autostart (if not already running) and the following
window will appear:
Select the COMPORT that the device is connected to on your computer from the drop-down
box. (This is the COMPORT number noted above in step 2 of
A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL
Completed
, click Close.
Communication port setting
.) The
Page 43