Table of Contents
Advertisement
Commissioning and Diagnostics
Including the GSD File in STEP 7 / COM PROFIBUS
The name of the GSD file for the ET 200iS is sir3806e.gse.
The following table describes how to include the GSD file in SIMATIC S7 or
SIMATIC S5 (COM PROFIBUS).
Table 7-4
1. Start STEP 7, open HW Config, and
select the menu command Options / Install
New GSD File.
2. In the next dialog, select the GSD file you
want to install and confirm with OK.
Result: The field device is displayed in the
hardware catalog in the PROFIBUS-DP
directory.
Downloading the GSD File
You can download the GSD file sir3806e.gse for the ET 200iS
• On the Internet at http//www.ad.siemens.de/csi_e/gsd
• Via modem on +49 (911) 73 79 72
7-6
Including the GSD File in STEP 7 / COM-PROFIBUS
STEP 7
COM PROFIBUS, as of V3.0
1. Copy the GSD file of the ET 200iS to the
COM PROFIBUS folder: ...COMPB3\GSD
(default)
Copy the bitmap file to the
folder:...COMPB3\BITMAPS
2. Start COM PROFIBUS and select the
menu command File / Read in GSD File.
Result: ET 200iS is displayed in the
hardware catalog during the slave
configuration
ET 200iS Distributed I/O Station
A5E00087831-02
Advertisement
Table of Contents
