Gsd File Implementation In The Configuration Software; Et 200Eco Configuration - Siemens SIMATIC ET 200eco Manual

Commissioning and diagnostics
4.1

ET 200eco configuration

GSD file
Configure the ET 200eco distributed I/O station via the GSD file. In this GSD file,
the ET 200eco is implemented as standard slave in your system. You can
download the GSD files
• under the Internet URL http//www.ad.siemens.de/csi_e/gsd
GSD filenames for ET 200eco:
• I/O module 8 DI: Siem80db.gs*
• I/O module 16 DI: Siem80da.gs*
• I/O module 8 DO 2 A: Siem80dd.gs*
• I/O module 16 DO 0.5 A: Siem80fb.gs*
• I/O module 8 DI / 8 DO 2 A: Siem80dc.gs*
• I/Omodule 8 DI / 8 DO-2 1.3 A: Siem80fc.gs*
*
Placeholder for the corresponding language (e.g. German: Siem80db.gsg)
How to implement the GSD file in the configuration software
Table 4-1 below describes how to implement the GSD file in SIMATIC S7 or
SIMATIC S5 (COM PROFIBUS) systems.
Table 4-1
Step
1 Start STEP 7. Open HW Config and
call menu command Extras
new GSD file.
2 In the next dialog block, select the
GSD file you want to install and
confirm with OK.
Result: The field device is displayed
in the hardware catalog, under the
PROFIBUS–DP directory.
3 Configure ET 200eco under STEP 7
(See Integrated Help in STEP 7).
1
Other configuration software: refer to the corresponding documentation
4-2

GSD file Implementation in the configuration software

STEP 7, as of V4.02 COM PROFIBUS, V3.0 and higher
Copy the device database (GSD) file for
Install the ET 200eco to the COM PROFIBUS
"
directory: ...COMPB3\GSD (default
setting)
Copy the bitmap file to directory:
...COMPB3\BITMAPS
Start COM PROFIBUS. Select menu
command File
ET 200eco is displayed in the hardware
catalog during slave configuration.
Configure ET 200eco under COM
PROFIBUS (See Integrated Help in COM
PROFIBUS).
ET 200eco Distributed I/O Station
1
Load GSD file. Result:
"
A5E00158716-02