Siemens SIMATIC ET 200iS Manual page 282

Analog Electronics Modules
Parameters of 2AO I
All parameters are set with SIMATIC PDM.
Table 14-87 Parameters of 2AO I
Parameters of 2AO I
Format of the analog
values *
Channel x ( x = 0, 1)
Output type
Output range
Response to CPU/ master
STOP
Substitute value
Group diagnostics
Wire break diagnostics
Short circuit diagnostics
* Entered automatically by SIMATIC PDM. See IM 151-2 parameters.
14-68
Range of Values
•
SIMATIC S7
•
SIMATIC S5
•
I (current)
•
deactivated
•
4 to 20 mA
•
0 to 20 mA
•
Output no current/voltage
•
Apply substitute value
•
Hold last value
Every value of the nominal
range
•
enabled
•
disabled
•
enabled
•
disabled
•
enabled
•
disabled
Default
SIMATIC S7 ET 200iS
I (current) Channel
4 to 20 mA Channel
Output no Channel
current/voltage
4.0000 mA Channel
enabled Channel
enabled Channel
enabled Channel
ET 200iS Distributed I/O Station
Effective for
A5E00087831-02