Table of Contents
Advertisement
Terminal Modules
10.2
Terminal Module for the Power Supply Module TM-PS
Order Number
6ES7 193-5DA00-0AA0
Features
• Terminal module for the power supply module
• Provides power for the entire ET 200iS station
• Connected using screw terminals
• 3 terminals for connection of the supply voltage/ equipotential bonding (load
voltage)
• 3 terminals for looping through the supply voltage / equipotential bonding
• 2 terminals for looping through the powerbus voltage (prepared)
• Prewiring of the terminal module possible
• Automatic interference diversion from the power supply module to the DIN rail
via spring contacts
• Polarity reversal protection guaranteed by the power supply module.
Terminal Assignment
The following table shows the terminal assignment on the terminal module.
Table 10-2
Layout
1L+
2L+
1M
2M
1PA
2PA
RL+
RM
10-2
Terminal Assignment on the Terminal Module TM-PS
Terminal
1 L+
Load voltage for inserted power supply module (20 to
30 V DC)
1 M
1 PA
Equipotential bonding
2 L+
Loop through the load voltage
2 M
2 PA
Equipotential bonding
RL+
Powerbus voltage for looping through (prepared)
RM
Description
ET 200iS Distributed I/O Station
A5E00087831-02
Advertisement
Table of Contents
