Table of Contents
Advertisement
Identification Data
The identification data contain further information on the module and are read out
with SIMATIC PDM. The identification data are resident on the module.
Table 12-3
Identification Data
Identification Data
Device
Vendor
Device identification
Device serial number
Hardware revision
Software revision
Static revision no.
Installation date
Operating unit
TAG
Description
12.3
Parameter Description
12.3.1
Startup when defined and actual configuration differ
Parameter
The effect of this parameter is that ET 200iS distributed I/O station starts up even if
the defined and actual configuration do not match.
12.3.2
Time stamping / edge evaluation
Time stamping / edge evaluation
The time stamping of binary signal changes is supported in the PCS 7 system by
all hardware and software components: from the ET 200iS over the S7-400 right to
the OS.
Time stamping parameter: With this parameter, you activate time stamping for all
the digital input modules of the ET 200iS.
ET 200iS Distributed I/O Station
A5E00087831-02
Range of Values
read
read
read
read
read
read
read/ write (max. 16 characters)
read/ write (max. 32 characters)
read/ write (max. 54 characters)
Interface Module
Default
Effective for
SIEMENS AG
Module
Order Number
depends on the
product version
---
---
---
Module
---
12-5
Advertisement
Table of Contents
