Table of Contents
Advertisement
Preface
Scope of the Manual
This manual is valid for the distributed I/O station ET 200iS.
Approbations, Standards, and Approvals
Approbations
The distributed I/O station ET 200iS complies with the following directives:
• EU directive 73/23/EEC on low voltages
• EU directive 89/336/EEC on electromagnetic compatibility
• EU directive 94/9/EC on correct usage in hazardous plants
Standards and Approvals
The distributed I/O station ET 200iS
• is based on the standard IEC 61158/ EN 50170, Volume 2, PROFIBUS.
• meets the requirements and criteria of IEC 61131-2 and the requirements for
the CE mark.
• is approved for FM (applied for), CENELEC.
For more detailed information on the standards and approvals, refer to General
Technical Specifications.
Where this Documentation Fits In
In addition to this manual, you also require the manual for the DP master you are
using ( see Appendix Order Numbers).
In the Appendix Order Numbers, you will find a list with further sources of
information on SIMATIC S7 and the ET 200 distributed I/O system.
A description of the parameter assignment and configuration frame is not included
in this manual. You will find a description on the Internet at
http://www.ad.siemens.de/simatic-cs
Guide to the Manual
This manual describes the hardware of the ET 200iS distributed I/O station. It
consists of introductory chapters and reference chapters (technical specifications).
The manual deals with the following topics:
• Installing and wiring the ET 200iS distributed I/O station
• Commissioning and diagnostics of the ET 200iS distributed I/O station
• Components of the ET 200iS distributed I/O station
• Order Numbers
1-2
ET 200iS Distributed I/O Station
A5E00087831-02
Advertisement
Table of Contents
