Subaru Legacy 2005 Service Manual page 2604

Preparation for Overhaul
MANUAL TRANSMISSION AND DIFFERENTIAL
8. Preparation for Overhaul
A: PROCEDURE
1) Clean oil, grease, dirt and dust from transmis-
sion.
®
2) Using TORX BIT T70, remove the drain plug to
drain oil. Tighten the engine oil drain plug after
draining.
NOTE:
Use a new gasket.
Tightening torque:
⋅
70 N m (7.1 kgf-m, 51.6 ft-lb)
MT-00097
3) Attach the transmission to ST.
ST 499937100 TRANSMISSION STAND
S T
MT-00115
4) Rotating parts should be coated with oil prior to
assembly.
5) All disassembled parts, if to be reused, should
be reinstalled in the original positions and direc-
tions.
6) Always use new ones for gaskets, lock washers
and lock nut.
7) Liquid gasket should be used where specified to
prevent leakage.
5MT-42