Subaru Impreza 2002 Service Manual page 4290

12.Extension Case
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the extension case.
4) Completely remove the remaining liquid gasket
from the extension case and transmission case.
B: INSTALLATION
1) Select the transfer driven gear thrust washer,
and then install to extension case. <Ref. to 6MT-51,
ADJUSTMENT, Extension Case.>
2) Apply oil lightly to the outer periphery of bearing
cone, and then install to extension case.
3) Select the thrust washer of transfer drive gear,
and then install to center differential.
4) Apply liquid gasket to the transmission case.
Liquid gasket:
THREE BOND 1215
EXTENSION CASE
MANUAL TRANSMISSION AND DIFFERENTIAL
5) Install the extension case.
Tightening torque:
48 N·m (4.9 kgf-m, 35.4 ft-lb)
6) Install the manual transmission assembly to ve-
hicle. <Ref. to 6MT-39, INSTALLATION, Manual
Transmission Assembly.>
C: DISASSEMBLY
TR0657
1) Remove the transfer drive gear. <Ref. to 6MT-
58, REMOVAL, Transfer Drive Gear.>
2) Remove the extension guide.
3) Remove the shift bracket.
TR0658
6MT-49
TR0657
TR0659
TR0660