Selects/Loads Or Parks The Fanfold From The Front 2 Path - Printronix S828 Programmer's Manual

Programmer Manual
DC4 DC4 ESC N

Selects/loads or parks the fanfold from the Front 2 path.

ASCII Code
Hexadecimal Value
Decimal Value
Range
n Selection
0 Selects and loads the fanfold from the Front2 path. If the paper is present, the printer automatically
parks the fanfold that is not requested before loading the new one (after having pressed the PARK
key in response to the TEAR IF NECESS/PARK PAPER message).
1 Parks the fanfold loaded from the Front2 path to allow the tear off function (after having pressed the
PARK key in response to the TEAR IF NECESS/PARK PAPER message).
DC4 DC4 ESC R
String rotation.
ASCII Code
Hexadecimal Value
Decimal Value 20 20 27 82 n string EM
n Selection
0 No rotation.
1 Rotation at 0°
2 Rotation at 90°
3 Rotation at 180°
4 Rotation at 270°
DC4 DC4 ESC r
Digit rotation.
ASCII Code
Hexadecimal Value
Decimal Value
This command is used to set the required character rotation to be applied to the selected font.
n Selection
0 No rotation.
1 Rotation at 0°
2 Rotation at 90°
3 Rotation at 180°
4 Rotation at 270°
DC4 DC4 ESC T
Selects/loads or parks the fanfold from the Front1 path.
ASCII Code DC4 DC4 ESC T n
Hexadecimal Value
Decimal Value
Range 0 = n = 1
Chapter 2 Native Emulation Commands
DC4 DC4 ESC N n
X'14' X'14' X'1B' X'4E' n
20 20 27 78 n
0 = n= 1
DC4 DC4 ESC R n string EM
X'14' X'14' X'1B' X'52' n string EM
DC4 DC4 ESC r
X'14' X'14' X'1B' X'72'
20 20 27 144
X'14' X'14' X'1B' X'54' n
20 20 27 84 n
67
PTX‐S828
260071‐001A