Native Character Set - Printronix S828 Programmer's Manual

Programmer Manual
DC4 DC4 ESC 3 6
Sets vertical spacing 6 lines/30 mm.
ASCII Code
Hexadecimal Value
Decimal Value
This command sets vertical spacing to 6 lines per 30 mm.
DC4 DC4 ESC 3 8
Sets vertical spacing 8 lines/30 mm.
ASCII Code
Hexadecimal Value
Decimal Value
This command sets vertical spacing to 8 lines per 30 mm.
DC4 DC4 ESC A
Sets the horizontal spacing to 15, 17.1, 20 CPI.
ASCII Code
Hexadecimal Value
Decimal Value
This is terminator code and causes the current contents of the print buffer to be printed. The subsequent
characters are printed at the horizontal spacing specified by the n parameter.
n Spacing
4 15 cpi
5 17 cpi
6 20 cpi

Native Character Set

DC4 DC4 ESC g
Selects LQ fonts.
ASCII Code
Hexadecimal Value
Decimal Value
Range
If down-line loading is selected, the command is stored and activated as soon as the down-line loading is
canceled.
Boldface is available if the ESC p1 (proportional) is sent.
Chapter 2 Native Emulation Commands
DC4 DC4 ESC 3 6
X'14' X'14' X'1B' X'33' X'36'
20 20 27 51 54
DC4 DC4 ESC 3 8
X'14' X'14' X'1B' X'33' X'38'
20 20 27 51 56
DC4 DC4 ESC A n
X'14' X'14' X'1B' X'41' n
20 20 27 65 n
DC4 DC4 ESC g n
X'14' X'14' X'1B' X'67' n
20 20 27 103 n
0 = n = 255
58
PTX‐S828
260071‐001A