Chapter 3. Ansi Emulation Commands - Printronix S828 Programmer's Manual

Programmer Manual

Chapter 3. ANSI Emulation Commands

The following printer commands are supported by this printer according to the ANSI X3.64 emulation.
Most dimensional parameters in ANSI protocol are expressed in "decipoints". For example:
1 decipoint
72 decipoints
120 decipoints
720 decipoints
2880 decipoints
All parameter values must be expressed as ASCII numeric rather than binary values.
Parameters, within commands with multiple parameters, must be separated by a semicolon ";".
See "Basic Program Sample" at the end of this chapter and result printed by the printer.
Chapter 3 ANSI Emulation Commands
= 1/720 inch
= 1/10 inch
= 1/6 inch
= 1 inch
= 4 inches
71
PTX‐S828
260071‐001A