Equipment Check - X'10 - Printronix S828 Programmer's Manual

Programmer Manual
X'402000' Incorrect Forms Module Selection
Alternate Exception Action: None.
X'40E000' Forms Jam
Alternate Exception Action: None.

Equipment Check - X'10'

The following exception codes are the valid codes for an equipment check condition:
X'10F100' Permanent Error
Explanation:
1. There was a permanent hardware error.
2. The microcode detected an irrecoverable logic error.
3. The microcode detected a condition that should not
have occurred.
Alternate Exception Action: None.
Data Check - X'08'
The following exception codes are the valid codes for a data check condition:
X'082100' Undefined Character
Explanation:
1. An undefined character code has been detected in
Write Text data.
2. An undefined overstrike character code has been
detected.
3. A character has been detected in Write Text
Command data which is undefined at the quality
level specified by the XOA-PQC command.
4. An undefined character code has been detected in
Write Bar Code data.
Alternate Exception Action: For reasons 1-3, print
the default character. For reason 4, there is no
alternate exception action.
Specification Check-Bar Code - X'04'
The following exception codes are the valid codes for a bar code specification check condition:
X'040300' Bar Code Type Requested Is Not
Supported
Explanation: The bar code type requested in the
Write Bar Code Data Descriptor field is not
supported.
Chapter 6 IPDS Exception Reporting Codes
X'401300' Tear-Off Required
Explanation: The printer needs operator
intervention to tear off a continuous forms paper
source so paper source switching can be done.
Alternate Exception Action: None
X'40E400' Cancel Print Key Pressed
Explanation: The Cancel Print key was
pressed while the printer was receiving IPDS
data.
Alternate Exception Action: None.
X'08C100' Position Check
Explanation: An attempt was made to print
outside the valid printable area.
Alternate Exception Action: All physical
printing
outside the valid printable area is suppressed.
All data and controls continue processing. The
printer continues to print within the valid
printable area to the greatest possible extent.
For text, this may mean truncating text lines at
the character boundary closest to the edge of
the intersection. For graphics, this may mean
truncating graphics pictures at the pel closest
to the boundary. For image, this may mean
truncating scan lines at the pel closest to the
boundary, or alternatively, not printing any of
the image if any part of the image falls outside
the valid printable area.
X'040400' LCID Requested Is Not Supported
Explanation: The type style/font requested in
the
Write Bar Code Data Descriptor field is not
supported.
216
PTX‐S828
260071‐001A