Set Marker Symbol; Set Character Cell Size - Printronix S828 Programmer's Manual

Programmer Manual
Hex Line Type
0C Diagonal Lines 2 (Bottom Left to Top Right)
0D Diagonal Lines 1 (Top Left to Bottom Right)
0E Diagonal Lines 2 (Top Left to Bottom Right)
0F No Shading
10 Solid Shading
40 Blank

Set Marker Symbol

29
Description: This order sets the value of the current marker symbol attribute for subsequent markers. See
"Marker" and "Marker at Current Position" orders.
Parameter P1 specifies the marker symbol attribute value. This value determines which marker from the
marker symbol set the printer uses for subsequent orders. The following are the marker symbol values:
Hex Line Type
00 Current Default
01 Cross
02 Plus
03 Diamond
04 Square
05 Six Point Star
06 Eight Point Star
07 Filled Diamond
08 Filled Square
09 Dot
0A Small Circle
40 Blank

Set Character Cell Size

33
or
21
Description: This order specifies the size of the character cell for output characters with subsequent
Character String orders. The character cell size for non-graphics (for example, text) does not change with
this order. The Set Character Cell order does not change any other graphic drawing attributes.
There are two types of formats with this order. The first format has a length of 4 and has four parameter
bytes. The second format has a length of 8 and has eight parameter bytes.
Chapter 5 IPDS Programming Information
04
04 P1-P4
08 P1-P4
182
PTX‐S828
260071‐001A