Esc ^ Prints A Single Character From The All Characters Table. (Ibm) - Printronix S828 Programmer's Manual

Programmer Manual
ESC ^
Prints a single character from the all characters table. (IBM)
ASCII Code
Hexadecimal Value
Decimal Value
Range
This command prints the next character from the all characters table. This sequence prints only one
character from the all character table.
ESC 6
Selects the Character Set 2 (EPSON, IBM).
ASCII Code
Hexadecimal Value
Decimal Value
This command selects the character set 2.
ESC 7
Selects the Character Set 1 (IBM).
ASCII Code
Hexadecimal Value
Decimal Value
This command selects the character set 1.
ESC k
Selects the NLQ fonts. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
Selects one of the available fonts in Letter Quality. If Draft mode is selected when this command is sent,
the new LQ font is selected when the printer returns to LQ printing.
n Types
0 Courier
2 Gothic
ESC R
Selects Nation character set. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
Range
Chapter 1 EPSON/IBM Commands
ESC ^ n
X'1B' X'5E' n
27 94 n
0 = n = 255
ESC 6
X'1B' X'36'
27 54
ESC 7
X'1B' X'37'
27 55
ESC k n
X'1B' X'6B' n
27 107 n
ESC R n
X'1B' X'52' n
27 82 n
0 = n = 13
43
PTX‐S828
260071‐001A