Table of Contents
Advertisement
8.
Again verify the items listed in step 6. Any adjustments to the paper stack can be
made while the printer is running. If an adjustment is made, again check the stack
after
NOTE: If the paper is not stacking properly, check the following items in
addition to those listed in step 6.
NOTE 1: If printing occurs across the paper perforations, the paper may
not stack correctly. Adjust the Skip-Over Perforation configuration pa
rameter to eliminate printing across the paper perforations.
NOTE 2: If the paper path is too close to either side panel, paper stacking
can be disrupted. Adjust the paper path toward the center of the printer,
away from the side panels.
NOTE 3: The front paper fence may be incorrectly positioned. Reposition
the front paper fence into one of the other bracket locations.
NOTE 4: Check that the chains are properly installed and that they engage
the paper.
2-14
approximately
15
Figure 2-9. Front Paper Fence Installation
to
20
sheets
have
been
processed.
P9012 Overview
Advertisement
Table of Contents
