Printronix S828 Programmer's Manual page 81

Programmer Manual
ESC K or PLD
Partial line down.
ASCII Code
Hexadecimal Value
Decimal Value
This command causes the paper to be positioned down one half line space at the current line spacing
value. This can create an appearance of subscripting. This sequence is also used after an ESC L (partial
line up sequence) to recover the original active vertical position.
ESC L or PLU
Partial line up.
ASCII Code
Hexadecimal Value
Decimal Value
This command causes the paper to be positioned up one half line space at the current line spacing value.
This can create an appearance of superscripting. This sequence is also used after an ESC K (partial line
down sequence) to recover the original active vertical position.
ESC M or RI
Reverse index.
ASCII Code
Hexadecimal Value
Decimal Value
This command causes the paper to be positioned up one line space at the current line spacing value.
ESC [ p1 d
Vertical position absolute (VPA).
ASCII Code
Hexadecimal Value
Decimal Value 27 91 p1 100
This command causes the current vertical position to be set to the decipoint value specified by the p1
parameter relative to the top most line of the current form length. This sequence can be used to print
within the top and the bottom margins.
ESC [ p1 e
Vertical position relative (VPR).
ASCII Code
Hexadecimal Value
Decimal Value 27 91 p1 101
This command causes the current vertical position to be advanced to the position specified by the p1
parameter (in decipoints) relative to the current print line position.
Chapter 3 ANSI Emulation Commands
ESC K or PLD
X'1B' X'4B' (7-bit) or X'8B' (8-bit)
27 75 (7-bit) or 139 (8-bit)
ESC L or PLU
X'1B' X'4C' (7-bit) or X'8C' (8-bit)
27 76 (7-bit) or 140 (8-bit)
ESC M or RI
X'1B' X'4D' (7-bit) or X'8D' (8-bit)
27 77 (7-bit) or 141 (8-bit)
ESC [ p1 d
X'1B' X'5B' p1 X'64'
ESC [ p1 e
X'1B' X'5B' p1 X'65'
79
PTX‐S828
260071‐001A