Ep Setup - Ricoh LI-MF1 M126 Field Service Manual

EP SETUP

The triangles pointing up or down indicate whether there are additional menus. Touch the up or down
arrows to display these additional menus.
• If you make changes, touch "Submit" to make the change effective.
EP defaults
This setting is used to restore each setting listed in EP SETUP to its factory default value. Sometimes this is
used to help correct print quality problems.
To restore EP Defaults:
1. Touch to select "EP Defaults" from EP SETUP.
2. Touch to select "Restore" to reset the values to the factory settings, and touch
Not Restore" to exit without changing the settings.
Touch "Back" to exit without changing the settings.
Fuser temperature (Fuser temp)
This adjustment can be used to help solve some customer problems with paper curl on low-grade papers
and problems with letterheads on some types of media.
The fuser temperature can be adjusted to: Normal, Lower, Lowest. The default is Normal.
Touch "Back" to return to Diagnostics Menu.
Diagnostics Menu
5
to select "Do
177