Printhead Assembly Electronic Adjustment - Ricoh LI-MF1 M126 Field Service Manual

5. System Maintenance

Printhead Assembly Electronic Adjustment

• Before aligning the printhead electronically, first align the printhead mechanically, if needed (
186 "Printhead Assembly Mechanical Adjustment").
1. Enter the Diagnostics menu. See "Entering Diagnostics" in "System Maintenance".
2. Touch "Registration" to enter the Registration menu.
Quick Test page
(sample only; use actual sheet)
5
3. Touch "Quick test" to print the Quick test page.
4. In the Registration menu, select the right margin setting.
5. To determine the margin setting, choose the value that is next to the darkest bar on the center graph
of the margin page. Add that value to the current right margin setting printed on the left hand side
of the margin page. (The right margin setting will also appear on the operator panel display.) For
184
p.