Duplex/Main Motor Gear Drive Interface Removal - Ricoh LI-MF1 M126 Field Service Manual

Removal Procedures
3. Remove the three screws (A) from the shield.
4
4. Remove the four screws (B) from the duplex.
5. Lift the duplex slightly, push to the left, and tilt to clear the right side of the printer.
6. Take out the duplex.

Duplex/Main Motor Gear Drive Interface Removal

1. LVPS/HVPS ( p.70 "LVPS/HVPS Removal")
2. Duplex ( p.54 "Duplex Removal")
3. Main motor gear drive ( p.72 "Main Motor Gear Drive Removal")
55