Fuser Removal - Ricoh LI-MF1 M126 Field Service Manual

4. Replacement and Adjustment
b. Connect the fuser link.
c. Remove the two screws (D).
d. Slide the latch to the left to free it, and then rest it on the door. Keep the spring in place.
e. Finish tightening the screws (F), and reinstall the remaining parts.

Fuser Removal

1. Rear exit guide (
Removal")
4
2. Remove the two screws (A).
3. Partially pull the fuser forward for better access.
62
p.103 "Rear Exit Guide Assembly with Sensor and Reversing Solenoid