Imaging Component Removals; Adf Unit Removal; Flatbed Removal - Ricoh LI-MF1 M126 Field Service Manual

Imaging Component Removals

ADF Unit Removal

1. ADF rear cover (release the three tabs (A) which fasten the ADF rear cover to the ADF unit).
2. Disconnect the ADF cable (B) and two sensor connections (C) on the relay card above the ADF
relay cable.
3. Lift the ADF unit up and depress the tabs located on the bottom of the ADF hinges to release the
ADF from the flatbed.

Flatbed Removal

1. Left side cover ( p.66 "Left Side Cover Removal").
Imaging Component Removals
4
111