Engine Board Removal - Ricoh LI-MF1 M126 Field Service Manual

2. Disconnect the controller board fan cable from J99 on the controller board.
3. Remove the two screws (A) which secure the controller board fan to the controller board cage.

Engine Board Removal

• This product contains a lithium battery. THERE IS A RISK OF EXPLOSION IF THE BATTERY IS
REPLACED BY AN INCORRECT TYPE. Discard used batteries according to the battery
manufacturer's instructions and local regulations.
1. Right side cover ( p.104 "Right Side Cover Removal")
2. Disconnect all the cables from the engine board.
Removal Procedures
4
51