Adf Edge Erase; Fb Edge Erase; Scanner Manual Registration - Ricoh LI-MF1 M126 Field Service Manual

5. System Maintenance

ADF Edge Erase

This menu item sets the size, in millimeters, of the no-print area around an ADF scan job. All copy jobs
have a minimum of a two millimeter border. Copy jobs will use the setting or two millimeters, whichever
is larger.
To adjust the ADF edge erase setting, perform the following steps:
1. Touch "ADF Edge Erase" from the Configuration Menu.
the touch-screen.
2. Touch to increase the value or
3. Touch "Submit" to save the change.
4. Touch "Back" to cancel and return to the Configuration Menu.

FB Edge Erase

5
This menu item sets the size, in millimeters, of the no print area around a flatbed scan job. Copy jobs will
use the setting or two millimeters, whichever is larger.
To adjust the flatbed edge erase setting, perform the following steps:
1. Touch "FB Edge Erase" from the Configuration Menu.
touch-screen.
2. Touch to increase the value or
3. Touch "Submit" to save the change.
4. Touch "Back" to cancel and return to the Configuration Menu.

Scanner Manual Registration

This item is used to manually register the flatbed and ADF on the machine's scanner unit. Registration
should be performed whenever the ADF unit, flatbed unit, or controller card are replaced.
To manually register a Duplex ADF, perform the following steps:
1. In the Configuration Menu, scroll to the Scanner Manual Registration menu item.
2. Touch Scanner Manual Registration.
3. Touch the Print Quick Test Page menu item.
4. To view and adjust the duplex ADF front side registration, place the quick test page face up into the
ADF.
5. Touch Copy Quick Test.
6. After the quick test page copies, touch ADF Front.
7. Use the or
150
to decrease the value.
to decrease the value.
to increase or decrease the settings value for horizontal adjust and top margin.
[setting's current value]
[setting's current value]
appears on
appears on the