Energy Conserve; Min Copy Memory - Ricoh LI-MF1 M126 Field Service Manual

5. System Maintenance
This setting enables you to restore all of the machine's settings to the base machine settings, the network
settings, or to remove all LES applications.
To restore the Factory Default settings:
1. Touch "Factory Defaults" from the Configuration Menu.
2. Touch "Restore Base" to restore all non-critical base machine NVRAM settings.
3. Touch "Restore Network" to restore all network NVRAM settings.
4. Touch "Restore LES" to remove all LES applications.
When you select either value, the LCD displays "Restoring Factory Defaults" and then "Resetting the
Device". The device immediately performs a POR and restores the appropriate settings to their factory
default values.
The following settings are not changed:
• Display Language (general settings)
5
• Network/Ports Menu
• Standard USB, USB (x) Menus (if an ENA is installed)

Energy Conserve

This menu controls what values appear on the Power Saver menu. If "Off" is selected in the Energy
Conserve menu, then "Disabled" appears in the Power Saver menu, and Power Saver can be turned off.
If "On" is set in the Energy Conserve menu, the Power Saver feature cannot be disabled.
To change this setting:
1. Touch "Energy Conserve" from the Configuration Menu.
the touch-screen.
2. Touch or
3. Touch "Back" to cancel and return to the Configuration Menu.
4. Touch "Submit" to save the change.

Min Copy Memory

Values will only be displayed if the amount of installed DRAM is at least twice the amount of the value,
that is, at least 200 MB of installed DRAM is required to display the 100 MB selection.
To change this setting:
1. Touch "Min Copy Memory" from the Configuration Menu.
on the touch-screen.
2. Touch to decrease the setting's value; touch
3. Touch "Back" to cancel and return to the Configuration Menu.
148
to scroll through the setting's possible values.
[setting's current value]
[setting's current value]
to increase the setting's value.
appears on
appears