Table of Contents
Advertisement
4
EcoSystem
Programmer
®
Transmitting to Control Devices with IR Receivers
Programming information is transmitted wirelessly from the
EcoSystem programmer to any sensor or control with an integrated
IR receiver. When programming, stand within 8 feet (2.4 meters) of
the sensor or control and point the top of the programmer directly at
it.
Regardless of what function is being performed, the system can be
accessed through any IR receiver. For example, it is not necessary
to point the programmer at the daylight sensor being programmed if
a keypad provides more convenient access.
Keypads and IR receivers have LEDs that blink when programming
messages are transmitted.
If the device does not receive the signal, move closer to the device
or adjust the angle of the programmer. It is also important to ensure
that the programmer battery is charged and has enough strength to
transmit the signal to the device.
NOTE: Occupant sensors do not have integrated IR receivers.
Advertisement
Table of Contents
