34
EcoSystem
Setting the Gain
You can directly set the BMJ or XPJ module's sensitivity to changing
light levels detected by the daylight sensor.
1 1 From the BMJ / XPJ Settings
menu, select G G a a i i n n .
NOTE: For procedures on how to
display the BMJ / XPJ Settings
menu, refer to page 32.
2 2 If selected ballasts flash and
go to their high level, tap
3 3 Select a gain level of 1
through 10, with 1 meaning
the module will be least
sensitive to light level changes
and 10 being the most
sensitive. Then tap
4 4 Depending on what you want
to do next, select:
• Continue Configuration of
Current Ballast(s)
• Configure Different
Ballast(s)
• Done
5 5 When done, if the last
configured ballast(s) flash and
go to their high level, tap
Programmer
®
.
.
.
1 1
3 3