Mounting - Siemens Sinamics S120 Commissioning Manual
Canopen interface
Hide thumbs
Also See for Sinamics S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
3.2
Mounting
Mounting and installation steps
The CBC10 is mounted in the option slot on Control Unit CU320-2 as follows (see diagram
below):
1. Unscrew and remove the protective cover.
2. Insert the CBC10.
3. Fix the CBC10 in place with screws.
①
②
Figure 3-2
The following are required:
Screws
Tools
Tightening torque
CANopen interface
Commissioning Manual, 11/2017, 6SL3097-4AA00-0BP3
Protective cover
Option Board CBC10
Mounting a CBC10 based on CU320-2 DP example
M3
Torx T10 screwdriver
0.8 Nm
CAN CBC10 Communication Board
3.2 Mounting
83
Advertisement
Table of Contents
