CAN CBC10 Communication Board
3.1
Connection
The CBC10 is used to connect drives of the SINAMICS S120 drive system to higher-level
automation systems with a CAN bus.
Figure 3-1
The CBC10 uses two 9-pin sub D connectors for the connection to the CAN bus system.
The connectors can be used as inputs or outputs. Unused pins are plated through.
The following baud rates are supported: 10, 20, 50, 125, 250, 500, 800 kBaud, and 1 Mbaud.
CANopen interface
Commissioning Manual, 11/2017, 6SL3097-4AA00-0BP3
View of CBC10
3
81