Table of Contents
Advertisement
Operating the analyzer
4.4
Display controller
Figure 4-4:
A.
B.
You can control the analyzer through six navigation buttons
controller.
The LCD display (A) can be used to display:
1.
2.
3.
4.
5.
The navigation buttons (B) are configured to perform different functions according to
which software screen is shown on the LCD display.
4.5
Gas Sensor Main screen
When the analyzer is switched on, at the end of the startup procedure, the Gas Sensor Main
screen
displayed.
NOTICE
The gas concentrations shown in the following screenshots may be different from those shown
in your particular analyzer. The screenshots indicate the functionality of the software, which is
the same regardless of the gases or gas concentrations being measured.
38
Front Panel Display Controller
LCD display
Navigation buttons
Gas concentration measurements obtained
Operating temperature and pressure
Help screens
Step-by-step calibration
Diagnostics
(Figure
4-5) appears. The Gas Sensor Main screen is the screen that is normally
(Figure
4-4, B) on the display
CT5800
Advertisement
Table of Contents
