Maintenance - Neopost IJ80 Instruction Manual

(You may directly type on the MULTI LABEL keys with an
external scale, to get the labels).
- Remove the label by pulling upwards.
- Press the RTD label button
START
or press
STOP
by touching
ESCAPE
Indicator light display
1) At initialization, the display is amber when downloading infor-
mation from the base.
2) When ready the RTD displays a plain green light.
When printing, the light turns amber.
The green is blinking if multilabelling.
3) The indicator light turns to red when:
- You have reach the end of roll;
- The cover is open;
- There is no paper;
- RTD non operational.

10.5 Maintenance

Periodic cleaning
- Switch off the RTD.
- Clean the printhead with the cleaning pen, when loading a new roll.
Only use approved cleaning pen (provided with the RTD) to clean
the printhead. Order a new one when it is getting dirty or dry.
DO NOT CLEAN THE BLACK PRINT ROLLER.
(on the machine) to cancel label printing (validate
in the main screen).
Operation with a roll tape dispenser (RTD)
to get the next label,
85