4.2 Mail processing
4.2.1 Envelopes with Autofeed Sealer (except batch
mode)
- Place a stack of envelopes on the feed platform and press key
START
.
STOP
- To stop the envelope feeding, press key
for a few seconds until the machine stops automatically when
there are no more envelopes to be processed).
If the selected Mail Class has a ZIP code dependant
destination, perform the following steps:
- Select ZIP as the destination in the rate selection screen;
- Put on the feeder a stack of envelopes with same desti-
nation ZIP;
START
- When
STOP
input of the destination ZIP code (used for the whole
batch of envelopes).
4.2.2 Envelopes with dynamic scale in batch mode
- Place an envelope or a stack of envelopes on the feed platform
and press key
calculator defines the corresponding value and displays it.
- Touch
OK
72
Entering Postage Value and Mail Processing
is pressed, the mailing machine will ask for
START
: the first envelope is weighed. The rate
STOP
to confirm (or
ESCAPE
START
again (or wait
STOP
to cancel).