Introduction - Basic Operations - Sony DCR-IP45E Operating Instructions Manual

Introduction
– Basic operations
This section describes the basic operations to
operate the camcorder.
How to turn on the power and
select the mode
To supply power for the camcorder, see "Step 1
Preparing the power supply" on page 26.
(1) Slide the POWER switch down while pressing
the small green button, then release your
finger.
The camcorder is turned on, and then the
camcorder turns to the CAMERA mode so
that the CAMERA lamp lights up.
(2) Slide the POWER switch down. Each time you
slide it down, the mode changes as follows
and corresponding mode lamp also lights up.
CAMERA
Use this mode when you record
on a tape.
MEMORY/NETWORK (DCR-IP55E)
MEMORY: Use this mode when you
NETWORK (DCR-IP55E only):
VCR
Use this mode when you play
back or edit an image recorded
on a tape or "Memory Stick".
12
record on a "Memory Stick,"
or play back or edit an image
in a "Memory Stick."
Use this mode when you use
the network function. For
details, refer to the supplied
network function operating
instructions.
1,2
CAMERA
MEMORY/
NET-
WORK
VCR
POWER
(1)
(2)
(CHG)
OFF
ON
MODE