1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. Handycam DCR-IP1
  6. Service manual

Sony DCR-IP1 Service Manual

Hide thumbs Also See for DCR-IP1:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual, Applications
SERVICE MANUAL
Ver 1.0 2003. 10
Revision History
Revision History
How to use
How to use
Acrobat Reader
Acrobat Reader
W100 MECHANISM
Link
Link
SPECIFICATIONS
SPECIFICATIONS
SERVICE NOTE
SERVICE NOTE
DISASSEMBLY
DISASSEMBLY
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987626751.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL1 (987626741.pdf).
• For MECHANISM ADJUSTMENTS, refer to the "MICRO MV MECHANICAL ADJUSTMENT MANUAL
W MECHANISM " (9-876-276-11).
• Reference No. search on printed wiring boards is available.
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
• TO TAKE OUT A CASSETE WHEN NOT EJECT (FORCE EJECT)
On the CD-458 and VC-333 boards
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the CD-458 and VC-333 boards.
Therefore, schematic diagrams, printed wiring boards, mounted parts location and electrical parts list of the CD-458 and VC-
333 boards are not shown.
The following pages are not shown.
Schematic diagrams ........................... Pages 4-9 to 4-46
Printed wiring boards .......................... Pages 4-65 to 4-70
DCR-IP1/IP1E
BLOCK DIAGRAMS
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
Mounted parts location .................. Pages 4-85 to 4-87
Electrical parts list ......................... Pages 5-14 and 5-18 to 5-26
DIGITAL VIDEO CAMERA RECORDER
RMT-832
LEVEL
US Model
Canadian Model
Korea Model
AEP Model
UK Model
East European Model
Chinese Model
Australian Model
Hong Kong Model
E Model
Tourist Model
DCR-IP1/IP1E
PRINTED WIRING BOARDS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
REPAIR PARTS LIST
2
DCR-IP1
DCR-IP1E
2

Advertisement

Table of Contents
loading

Related Manuals for Sony DCR-IP1

Summary of Contents for Sony DCR-IP1

  • Page 1 DCR-IP1/IP1E RMT-832 SERVICE MANUAL LEVEL US Model Ver 1.0 2003. 10 Canadian Model Revision History Revision History Korea Model DCR-IP1 AEP Model How to use How to use UK Model Acrobat Reader Acrobat Reader East European Model Chinese Model Australian Model...
  • Page 2 Audio/Video input/output unbalanced 10-pin connector System Chrominance signal: Input/output auto switch Video recording system DCR-IP1: 0.286 Vp-p, Video signal:1 Vp-p, 75 Ω (ohms), 2 rotary heads DCR-IP1E: 0.3 Vp-p, unbalanced, sync negative Helical scanning system 75 Ω (ohms), unbalanced Luminance signal: 1 Vp-p, 75 Ω (ohms),...
  • Page 3 MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

  • Page 4: Table Of Contents

    DCR-IP1/IP1E TABLE OF CONTENTS Section Title Page Section Title Page SERVICE NOTE PRINTED WIRING BOARDS AND 1-1. Note for Repair ································································ 1-1 SCHEMATIC DIAGRAMS 1-2. Power Supply During Repairs ········································· 1-1 4-1. Frame Schematic Diagrams 1-3. To Take Out a Cassette when not Eject (Force Eject) ····· 1-2 Frame Schematic Diagram (1/2) ·····································...

  • Page 5: Service Note

    DCR-IP1/IP1E SECTION 1 SERVICE NOTE 1-1. NOTE FOR REPAIR Make sure that the flat cable and flexible board are not cracked of When remove a connector, don’t pull at wire of connector. bent at the terminal. It is possible that a wire is snapped.

  • Page 6: To Take Out A Cassette When Not Eject (Force Eject)

    DCR-IP1/IP1E 1-3. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT) 1 Refer to “SECTION 2 DISASSEMBLY” to remove the mechanism deck block. 2 Disconnect CN101 (31P) of VC-333 board. 3 Add +5V from the DC POWER SUPPLY and unload with a pressing the cassette compartment.

  • Page 7: Self-Diagnosis Function

    DCR-IP1/IP1E 1-4. SELF-DIAGNOSIS FUNCTION 1-4-1. Self-diagnosis Function 1-4-2. Self-diagnosis Display When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the function starts working, and displays on the LCD what to do. This LCD shows a 4-digit display consisting of an alphabet and numbers, function consists of two display;...

  • Page 8: Self-Diagnosis Code Table

    DCR-IP1/IP1E 1-4-3. Self-diagnosis Code Table Self-diagnosis Code Block Detailed Symptom/State Correction Function Code Non-standard battery is used. Use the InfoLITHIUM battery. Condensation. Remove the cassette, and insert it again after one hour. Video head is dirty. Clean with the optional cleaning cassette.
  • Page 9 DCR-IP1/IP1E Self-diagnosis Code Block Detailed Symptom/State Correction Function Code Inspect the lens block focus MR sensor (Pins qk, ql of CN5001 of CD-458 board) when focusing is performed when the touch panel Difficult to adjust focus is operated in the focus manual mode and the focus motor drive (Cannot initialize focus.)

  • Page 10: Disassembly

    DCR-IP1/IP1E SECTION 2 HELP HELP DISASSEMBLY The following flow chart shows the disassembly procedure. DISASSEMBLY DISASSEMBLY DISASSEMBLY DISASSEMBLY DISASSEMBLY DISASSEMBLY DISASSEMBLY DISASSEMBLY HELP DISASSEMBLY SERVICE POSITION HELP DISASSEMBLY DISASSEMBLY DISASSEMBLY HELP DISASSEMBLY DISASSEMBLY HELP HELP DISASSEMBLY HELP DISASSEMBLY DISASSEMBLY DISASSEMBLY...

  • Page 11: Service Position: Lcd Module

    DCR-IP1/IP1E [SERVICE POSITION: LCD MODULE] [SERVICE POSITION TO CHECK THE VTR SECTION] Connection to Check the VTR Section To check the VTR section, set the VTR to the "Forced VTR power ON" mode. Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position).

  • Page 12: Top Cabinet Assembly

    DCR-IP1/IP1E Note: Follow the disassembly procedure in the numerical order given. 2-1. TOP CABINET ASSEMBLY 7 Top cabinet assembly 6 Two claws 2 Open the P cabinet block assembly. 4 Screw (M1.7) 3 Turn the P cabinet block assembly. 1 Screw (M1.7) 2-2.

  • Page 13: Gear With Motor (Lens Cover) (M904)

    DCR-IP1/IP1E 2-3. GEAR WITH MOTOR (LENS COVER) (M904), FP-731 FLEXIBLE BOARD Note: When mounting the geared motor, Shutter lever concave portion meet a convex portion of the gear with a concave portion of the shutter lever. 4 Two solders 5 FP-769 flexible board...

  • Page 14: Cabinet R Block Assembly

    DCR-IP1/IP1E 2-5. CABINET R BLOCK ASSEMBLY 1 Open the P cabinet block assembly. 5 Close the P cabinet block assembly. 7 FP-732 flexible board (CN2605) 2 Screw (M1.7 2.5) 9 Cabinet R block assembly 4 Two screws (M1.7 2.5) 3 Screw (M1.7)

  • Page 15: Board

    DCR-IP1/IP1E 2-7. MS-153 BOARD 4 Control switch block (CF4720) (CN2901) Control switch block (CF4720) 3 Paying attention to the operation switch block, remove two convex portions of the board. 6 MS-153 board 1 MS sheet 2 Screw (M1.7 2.5) 5 FP-720 flexible board (CN2902) 2-8.

  • Page 16: Hinge Assembly, Fp-733 Flexible Board

    DCR-IP1/IP1E 2-9. HINGE ASSEMBLY, FP-733 FLEXIBLE BOARD 6 Screw (M1.7 3 Paying attention to the 8 Hinge cover (rear) FP-733 flexible board, remove the hinge assembly. 7 Two claws 9 Magnet 2 Two screws (M1.7 4 Two claws qa Rotate the FP-733 flexible board in the arrow A direction to remove, which winds around the hinge assembly.

  • Page 17: Installation Of Fp-733 Flexible Board

    DCR-IP1/IP1E [INSTALLATION OF FP-733 FLEXIBLE BOARD] 1 Fold the FP-733 flexible board. Fold FP-733 flexible board Fold : Fold mark : Fold mark PD-199 board side MS-153 board side MS-153 board side PD-199 board side Fold Fold Fold FP-733 flexible board...

  • Page 18: 2-10.If-108 Board

    DCR-IP1/IP1E 2-10.IF-108 BOARD 5 FP-722 flexible board 3 Screw (M1.7X2.5) (CN105) 2 Two screws 9 IF-108 board (M1.7X2.5) 6 FP-722 flexible board (CN2605) 7 Two claws 8 CR cover 1 Flexible board (CN2604) 2-11.SE-139 BOARD, MIC UNIT 1 Screw (M1.7X2.5)

  • Page 19: Board

    DCR-IP1/IP1E 2-12.LENS BLOCK ASSEMBLY 4 Joint 1 FP-719 flexible board (CN201) 3 Screw (M1.7X2.5) 6 Lens block assembly 7 FP-719 flexible board (CN5003) 5 Two screws (M1.7X2.5) q; CD sheet 2 8 CDP sheet 9 CD sheet 2-13.CD-458 BOARD 7 CD-458 board...

  • Page 20: Cabinet G

    DCR-IP1/IP1E 2-14.CABINET G 6 Remove the cabinet G direction of the arrow A. 4 Screw (M1.7X2.5) 5 Three bosses 2 Two screws (M1.7X2.5) 1 Screw (M1.7X2.5) 2-15.CABINET L ASSEMBLY 6 Cabinet L assembly 3 Screw (M1.7X2.5) 4 IF frame 5 Two screws (M1.7X2.5) 2 Two screws (M1.7X2.5)

  • Page 21: Q; 2-16. Vc-333 Board

    DCR-IP1/IP1E 2-16.VC-333 BOARD 5 Two claws 8 VC-333 board 3 Flexible board (CN101) 4 Screw (M1.7X2.5) 2 Flexible board (CN102) 1 Flexible board 6 Turn the VC-333 board. (CN103) 7 Flexible board (CN104) 2-17.MECHANISM DECK Sliding the charge lever in a direction of the arrow A, 2 Two screws (M1.4X2)
  • Page 22 DCR-IP1/IP1E 2-18.OPERATION SWITCH BLOCK (PW4720) 3 Peeling off the part A from the frame, remove the operation switch block (PW4720). Note: Peel off the part A a little by little, not applying an excessive force, as it is adhered strongly with an adhesive tape.
  • Page 23 DCR-IP1/IP1E 2-20.CIRCUIT BOARDS LOCATION CD-458 SE-139 MS-153 VC-333 PD-199 IF-108 Board Name Function CD-458 S/H, TIMING GENERATOR IF-108 CRADLE TERMINAL MS-153 MS CONNECTOR PD-199 LCD DRIVE SE-139 PITCH/YAW SENSOR VC-333 A/D CONVERTER, CAMERA SIGNAL PROCESS, VIDEO/AUDIO DSP, LENS CONTROL, LENS DRIVE,...
  • Page 24 DCR-IP1/IP1E 2-21.FLEXIBLE BOARDS LOCATION FP-734 FP-769 FP-733 FP-731 FP-732 FP-719 FP-720 FP-722 2-17E...
  • Page 25 DCR-IP1/IP1E HELP Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. FP-733 flexible board PD-199 board MS-153 board PD sheet Panel sheet MS sheet Light interception sheet FP-719 flexible board Lens block assembly P cabinet L CD sheet 2...
  • Page 26 DCR-IP1/IP1E VC-333 board (A side) VC-333 board (B side) ST sheet 3 Fuse label ST sheet 2 DD sheet ST sheet VC rubber Mechanism deck FP-720 flexible board MD sheet LS label LK sheet ST sheet LK sheet CR cushion...
  • Page 27 DCR-IP1/IP1E 3. BLOCK DIAGRAMS Link Link OVERALL BLOCK DIAGRAM (1/6) OVERALL BLOCK DIAGRAM (6/6) OVERALL BLOCK DIAGRAM (6/6) OVERALL BLOCK DIAGRAM (1/5) OVERALL BLOCK DIAGRAM (2/6) POWER BLOCK DIAGRAM (1/3) OVERALL BLOCK DIAGRAM (2/5) POWER BLOCK DIAGRAM (1/3) OVERALL BLOCK DIAGRAM (3/6)
  • Page 28 IR EN, IR PWM SHUTTER DIR PWM LENS COVER CONTROL RYO2 EDFLD OPEN (12/18) NTSC model : DCR-IP1 CAM SO, SI, SCK RH SO, RH SI, RH SCK PAL model : DCR-IPIE SE-139 BOARD CONTROL SWITCH BLOCK CN106 LENS TEMP AD...
  • Page 29 DCR-IP1/IP1E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-2. OVERALL BLOCK DIAGRAM (2/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. VC-333 BOARD (2/6) FP-720 MS-153 BOARD (1/3) FP-733...
  • Page 30 DCR-IP1/IP1E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-3. OVERALL BLOCK DIAGRAM (3/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. DRUM VC-333 BOARD (3/6) CN102 RECDT REC M/E...
  • Page 31 DCR-IP1/IP1E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-4. OVERALL BLOCK DIAGRAM (4/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. VC-333 BOARD (4/6) IC1302 (1/2) ACFG1, 2 IC1603...
  • Page 32 DCR-IP1/IP1E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-5. OVERALL BLOCK DIAGRAM (5/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. VC-333 BOARD (5/6) SDC IN Q1502 – 1505...
  • Page 33 DCR-IP1/IP1E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-6. OVERALL BLOCK DIAGRAM (6/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. CONTROL SWITCH BLOCK IF-108 BOARD (3/4) FP-722 VC-333 BOARD (6/6)
  • Page 34 DCR-IP1/IP1E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-7. POWER BLOCK DIAGRAM (1/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. FP-732 IF-108 BOARD (1/2) FP-722 VC-333 BOARD (1/3)
  • Page 35 DCR-IP1/IP1E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-8. POWER BLOCK DIAGRAM (2/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. VTR UNREG VC-333 BOARD (2/3) CONTROL SWITCH BLOCK...
  • Page 36 DCR-IP1/IP1E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-9. POWER BLOCK DIAGRAM (3/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. VC-333 BOARD (3/3) FP-722 IF-108 BOARD (2/2) CONTROL SWITCH BLOCK...

  • Page 37: Board

    DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAMS FRAME SCHEMATIC IC7231 DIAGRAM (1/2) LENS CCD IMAGER BLOCK FP-723 CN5003 CN201 CAM_SCK...
  • Page 38 DCR-IP1/IPE 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS FRAME SCHEMATIC DIAGRAM (2/2) LCD901 CN3502 N.C. CN2904 CN2903 CN3501 TP_TOP PANEL_OPEN_SW TP_BOT XSYS_RST(N.C.) XSYS_RST(N.C.) TOUCH FP-734 REG_GND MT_5V(BL_REG) MT_5V(BL_REG) N.C. PANEL N.C. PANEL_13.5V PANEL_13.5V...

  • Page 39: Cf4720, Ss4720, Pw4720

    DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS Link Link DH-041 BOARD DH-041 BOARD FP-723 FLEXIBLE BOARD FP-723 FLEXIBLE BOARD (CCD IMAGER) (CCD IMAGER) FP-080, FP-081, FP-228 FLEXIBLE BOARD FP-080, FP-081, FP-228 FLEXIBLE BOARD FP-731, FP-769 FLEXIBLE BOARD PD-199 BOARD PD-199 BOARD FP-731, FP-769 FLEXIBLE BOARD...
  • Page 40 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ...
  • Page 41 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SIGNAL PATH FP-723 FLEXIBLE BOARD VIDEO SIGNAL CCD IMAGER Note: The voltage and waveform of IC7231 Y/CHROMA can not be measured,because it is mounted by the side of lens. FP-723 FLEXIBLE BOARD is replaced as 840A (CZ) BLOCK ASSY, so that PRINTED WIRING BOARD is omitted.
  • Page 42 Schematic diagrams of the CD-458 and VC-333 boards are not shown. Pages from 4-9 to 4-46 are not shown.
  • Page 43 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS PD-199 BOARD PD-199 BOARD For Schematic Diagram • Refer to page 4-71 for printed wiring board. PD-199 BOARD IC3501 ek REC/PB IC3501 el REC/PB IC3501 r; REC/PB LCD DRIVE 350 mVp-p 350 mVp-p...
  • Page 44 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS IF-108 BOARD IF-108 BOARD For Schematic Diagram • Refer to page 4-73 for printed wiring board. IF-108 BOARD D2621 D2603 MAZS120008SO MAZS068008SO CRADLE TERMINAL XX MARK:NO MOUNT NO MARK:REC/PB MODE D2622 MAZS120008SO R:REC MODE...
  • Page 45 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS MS-153 BOARD MS-153 BOARD For Schematic Diagram • Refer to page 4-75 for printed wiring board. MS-153 BOARD MS CONNECTOR CN2905 XX MARK:NO MOUNT FB2901 NO MARK:REC/PB MODE R2911 C2904 N.C. MEMORY 0.1u...
  • Page 46 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SE-139 BOARD SE-139 BOARD For Schematic Diagram • Refer to page 4-77 for printed wiring board. SE-139 BOARD PITCH/YAW SENSOR XX MARK:NO MOUNT NO MARK:REC/PB MODE C2713 R2707 R2709 C2708 R2701 R2703 0.056u...
  • Page 47 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS DH-041 BOARD, FP-080, FP-081, FP-228, FP-731, FP-769 FLEXIBLE BOARD DH-041 BOARD, FP-080, FP-081, FP-228, FP-731, FP-769 FLEXIBLE BOARD For Schematic Diagram • Refer to page 4-79 for printed wiring board. FP-228 DH-041 BOARD...
  • Page 48 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS FP-732, FP-733, FP-734 FLEXIBLE BOARD FP-732, FP-733, FP-734 FLEXIBLE BOARD For Schematic Diagram • Refer to page 4-81 for printed wiring board. FP-732 FLEXIBLE BOARD FP-733 FLEXIBLE BOARD DC IN, AV JACK PANEL REVERSE DETECT...
  • Page 49 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS CONTROL SWITCH BLOCK CONTROL SWITCH BLOCK CONTROL SWITCH BLOCK (SS4720) is replaced as block, so that PRINTED WIRING BOARD is omitted. (CF4720) (SS4720) CONTROL SWITCH BLOCK (CF4720) is replaced as block, so that PRINTED WIRING BOARD is omitted.

  • Page 50: Printed Wiring Boards

    DCR-IP1/IP1E 4-3. PRINTED WIRING BOARDS Link Link DH-041 BOARD, DH-041 BOARD, DH-041 BOARD, DH-041 BOARD, PD-199 BOARD PD-199 BOARD PD-199 BOARD PD-199 BOARD FP-080, FP-081, FP-228, FLEXIBLE BOARD FP-080, FP-081, FP-228, FLEXIBLE BOARD FP-080, FP-081, FP-228, FLEXIBLE BOARD FP-080, FP-081, FP-228, FLEXIBLE BOARD...

  • Page 51: Flexible

    DSC-IP1/IP1E 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS • : Uses unleaded solder. • Chip parts. • : Circuit board Transistor Diode : Flexible board Pattern from the side which enables seeing. : pattern of the rear side (The other layers’...
  • Page 52 Printed wiring boaeds of the CD-458 and VC-333 boards are not shown. Pages from 4-65 to 4-70 are not shown.
  • Page 53 DCR-IP1/IP1E MOUNTED PARTS LOCATION 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION PD-199 (LCD DRIVE) : Uses unleaded solder. Note for Printed Wiring Board (See page 4-63). PD-199 BOARD CN3505 CN3502...
  • Page 54 DCR-IP1/IP1E MOUNTED PARTS LOCATION 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION IF-108 (CRADLE TERMINAL) : Uses unleaded solder. Note for Printed Wiring Board (See page 4-63). IF-108 BOARD (SIDE A)
  • Page 55 DCR-IP1/IP1E MOUNTED PARTS LOCATION 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION PD-153 (MS CONNECTOR) : Uses unleaded solder. Note for Printed Wiring Board (See page 4-63). MS-153 BOARD (SIDE A)
  • Page 56 DCR-IP1/IP1E MOUNTED PARTS LOCATION 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION SE-139 (PITCH/YAW SENSOR) : Uses unleaded solder. Note for Printed Wiring Board (See page 4-63). SE-139 BOARD (SIDE B)
  • Page 57 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS DH-041, FP-080, FP-081, FP-228 FLEXIBLE (MECHANISM BLOCK (SENSOR)) : Uses unleaded solder. FP-731, FP-769 FLEXIBLE Note for Printed Wiring Board (See page 4-63). Q001 FP-080 FLEXIBLE BOARD...
  • Page 58 DCR-IP1/IP1E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS FP-732, FP-733, FP-734 FLEXIBLE : Uses unleaded solder. Note for Printed Wiring Board (See page 4-63). FP-732 FLEXIBLE BOARD FP-734 FLEXIBLE BOARD LND261 BT901 BATTERY...
  • Page 59 Mounted parts location of the CD-458 and VC-333 boards are not shown. Pages from 4-85 to 4-87 are not shown.

  • Page 60: Mounted Parts Location

    DCR-IP1/IP1E 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-4. MOUNTED PARTS LOCATION no mark : side A * mark : side B PD-199 B0ARD IF-108 BOARD MS-153 BOARD SE-139 BOARD C3502 * C2601 * C2901 * C2701 C3503 * C2902...

  • Page 61: Repair Parts List

    DCR-IP1/IP1E NOTE NOTE 5. REPAIR PARTS LIST NOTE: Characters A to L of the electrical parts list indicate location of exploded views in which the desired part is shown. EXPLODED VIEWS EXPLODED VIEWS Link Link OVERALL ASSEMBLY F PANEL BLOCK ASSEMBLY...
  • Page 62 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST SECTION 5 REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name.
  • Page 63 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS 5-1-1. OVERALL ASSEMBLY Cabinet L block assembly-1 (See page 5-6.) I F - Cabinet R block assembly-1 (See page 5-4.) F panel block assembly (See page 5-3.) Ref. No.
  • Page 64 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-2. F PANEL BLOCK ASSEMBLY ns: not supplied M904 Ref. No. Part No. Description Ref. No. Part No. Description X-3953-861-1 F PANEL ASSY 3-080-204-01 SCREW, TAPPING, P2 (M1.7X3.5) 3-086-956-01 PLATE, LENS ORNAMENTAL...
  • Page 65 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-3. CABINET R BLOCK ASSEMBLY-1 ns: not supplied Cabinet R block assembly-2 (See page 5-5.) LCD901 - 1 9 Ref. No. Part No. Description Ref. No. Part No. Description X-3954-088-1 P CABINET R ASSY 3-086-939-01 P CUSHION 3-989-735-31 SCREW (M1.7X4), LOCK ACE, P2...
  • Page 66 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST BT7401 SP901 5-1-4. CABINET R BLOCK ASSEMBLY-2 ns: not supplied - 1 5 BT901 : BT7401 (BATTERY, LITHIUM SECONDARY) Board on the mount position (See page 4-82) The components identified by Les composants identifiés par une...
  • Page 67 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-5. CABINET L BLOCK ASSEMBLY-1 Cabinet L block assembly-2 (See page 5-7.) 201 202 Ref. No. Part No. Description Ref. No. Part No. Description 3-086-969-01 EJECT KNOB 3-989-735-01 SCREW (M1.7X2.5), LOCK ACE, P2...
  • Page 68 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-6. CABINET L BLOCK ASSEMBLY-2 ns: not supplied Lens block assembly (See page 5-8.) Mic block assembly (See page 5-9.) MD frame block assembly (See page 5-10.) Ref. No. Part No.
  • Page 69 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-7. LENS BLOCK ASSEMBLY ns: not supplied - 4 5 Ref. No. Part No. Description Ref. No. Part No. Description 3-087-193-01 LF SHEET 2 A-7111-603-A CD-458 BOARD, COMPLETE (IP1) 3-080-204-01 SCREW, TAPPING, P2 (M1.7X3.5)
  • Page 70 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-8. MIC BLOCK ASSEMBLY ns: not supplied MIC901 - 1 3 Ref. No. Part No. Description Ref. No. Part No. Description A-7111-605-A SE-139 BOARD, COMPLETE 1-478-183-21 SWITCH BLOCK, CONTROL (SS4720) 3-989-735-01 SCREW (M1.7X2.5), LOCK ACE, P2 MIC901 1-542-562-11 MICROPHONE UNIT 3-080-204-01 SCREW, TAPPING, P2 (M1.7X3.5)
  • Page 71 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-9. MD FRAME BLOCK ASSEMBLY Mechanism deck (See page 5-11 to 5-13.) - 3 3 VC-333 board: Side B - 3 3 Ref. No. Part No. Description Ref. No. Part No.
  • Page 72 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-10. OVERALL MECHANISM DECK SECTION (W100) M901 LS chassis block assembly (See page 5-12.) Mechanism chassis block assembly (See page 5-13.) Ref. No. Part No. Description Ref. No. Part No. Description...
  • Page 73 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-11. LS CHASSIS BLOCK ASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description X-3953-540-1 CHASSIS ASSY, LS 3-084-470-01 SPRING (TG1), TORSION 3-084-465-01 SPRING, S HARD X-3953-544-1 TG1 ASSY 3-084-462-01 BRAKE, S HARD...
  • Page 74 DCR-IP1/IP1E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-12. MECHANISM CHASSIS BLOCK ASSEMBLY ns: not supplied M903 M902 (Including belt) Q002 D001 FP-080 H002 H001 Q001 S001 Ref. No. Part No. Description Ref. No. Part No. Description 3-069-501-01 GEAR, CONVERSION...

  • Page 75: Electrical Parts List

    DCR-IP1/IP1E 5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description Electrical parts list of the CD-458 board is not shown. Page 5-14 is not shown. 5-14...
  • Page 76 DCR-IP1/IP1E FP-080 FP-723 FP-731 FP-732 FP-733 FP-734 IF-108 Ref. No. Part No. Description Ref. No. Part No. Description FP-080 FLEXIBLE BOARD (Not supplied) < IC > ******************** IC7301 (Not supplied) IC AN48830B-NL < HOLE ELEMENT > H001 8-719-067-74 ELEMENT, HOLE HW-105A-CDE-T...
  • Page 77 DCR-IP1/IP1E IF-108 MS-153 PD-199 Ref. No. Part No. Description Ref. No. Part No. Description Q2606 8-729-043-60 TRANSISTOR CPH6102-TL-E < SWITCH > Q2607 8-729-042-29 TRANSISTOR RN1104F (TPL3) S2901 1-771-138-82 SWITCH, KEY BOARD (RESET) < RESISTOR > < VARISTOR > R2601 1-218-964-11 RES-CHIP 8.2K...
  • Page 78 DCR-IP1/IP1E PD-199 SE-139 Ref. No. Part No. Description Ref. No. Part No. Description Q3507 8-729-042-26 TRANSISTOR 2SB1462J-QR (K8).SO FB2701 1-400-619-11 BEAD, FERRITE (CHIP) Q3508 8-729-054-48 TRANSISTOR UP04601008S0 FB2702 1-400-619-11 BEAD, FERRITE (CHIP) Q3509 8-729-054-48 TRANSISTOR UP04601008S0 FB2703 1-400-619-11 BEAD, FERRITE (CHIP)
  • Page 79 DCR-IP1/IP1E Checking supplied accessories. Adaptor, conversion 2P Clamp, ferrit (1) Cleaning cloth (1) A/V connecting cable (1) Memory Stick Duo (8MB) (1) 0 1-569-007-12 (JE) 1-469-778-11 3-073-861-01 1-823-156-13 21-pin adaptor (1) Adaptor, conversion 2P USB cable (1) 1-770-783-21 (AEP, UK, EE)
  • Page 80 DCR-IP1/IP1E 2003J0500-1 Sony EMCS Co. 9-876-267-31 ©2003.10 — 110 — Published by DI CS Strategy Div...
  • Page 81 [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once • To reverse the previous screens (operation) one by one, click 1. Click the Print button 2.
  • Page 82 Reverse 987626731.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2003.10 Official Release — —...

This manual is also suitable for:

Dcr-ip1e

Table of Contents